USE WITH ORIGINAL PPS SPRAY GUN CUP – Includes 25 disposable lids and liners for the standard 3M PPS paint cup. Use to apply paints, stains, varnishes, basecoats, undercoats, primers, sealers, clearcoats, gelcoats, sprayable adhesives and more
VERSATILE USES – Standard 28-ounce size ideal for any painting project, including cars, boats, furniture, equipment, home, arts and crafts
For industrial/occupational use only. Not for consumer use.
3M PPS Large Kit
3M PPS Large Kit contains 25 lids with micron filters, 25 liners, and 10 sealing plugs for use with the 3M Paint Preparation System. An all-in-one painting system that allows painters to mix/measure, filter, spray (in any direction!) and temporarily store coating materials. PPS disposable lids contain a welded-in filter which strains the paint material while spraying.
Designed for use with 3M Paint Preparation System, PPS.
Kit contains disposable Midi size disposable lids with micron filters, liners and sealing plugs.
PPS is an all-in-one disposable solution for mixing/measuring, filtering, spraying and temporary storage of closed coating materials.
System enables the painter to consistently spray at 90 degrees to the part, no matter the part orientation (even upside down), often reducing paint consumption.
The all-in-one solution reduces chance of outside contamination, delivers consistent material transfer which improves quality while reducing paint consumption.
PPS reduces cleaning solvent consumption by 70%.
Sealing Plugs are provided for temporary storage of paint materials.
Large Size refers to a paint mix volume of up to 28 fl oz (850mL), ideal for 4+panel repairs.
System delivers improved quality, lower material cost, less solvent consumption, improved productivity, less mess and easier use.
PPS available in 30 fl oz, 6 fl oz, 13.5 fl oz, 22 fl oz, and 28 fl oz sizes.
Advantages of the 3M PPS System
Unlike conventional paint cup systems, 3M PPS eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS, you place the disposable liner within the re-usable PPS Cup. Then simply mix the paint in the PPS disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS System. With just these few simple steps, you're ready to start spraying.
Your Spray Gun Functions at any Angle, Even Upside Down
PPS allows the painter to spray consistently 90° to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation - i.e. 360 degrees.
Clean Up is a Breeze and Uses Less Solvent
After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. of solvent.
Why You Should be Using the 3M PPS Paint Preparation System
PPS is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption, reduces solvent usage by up to 70%, and improves the operator’s efficiency by up to percent between the prep (mixing, measuring, and filtering) and clean-up time (time associated with cleaning the paint reservoir and spray gun). PPS is faster, easier, cleaning and an overall cost saving solution.
A Versatile System that Works with Most Spray Guns
Specifically designed PPS stainless steel metal adapters allow painters to use the PPS system with virtually any spray gun. Painters have also the option to use the 3M Accuspray one spray gun, which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time.
Reduces the Chance of Contamination Between Jobs
Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering, and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%.
The Bottom Line: Why 3M PPS is the Paint & Coatings Spray System of Choice
3M PPS is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. You'll find that technicians operate with greater efficiency and spend less time on cleaning tasks. 3M PPS offers many advantages for any one spraying liquid coatings from a spray gun with cup.
